“Blackbox  Analysis with Out-of-Box Services”

Annex 6 to the Convention on International Civil Aviation (ICAO):

7.2 Annual inspections shall be carried out as follows:

a)an analysis of the recorded data from the flight recorders shall ensure that the recorder operates correctly for the nominal duration of the recording;

b)the analysis of the FDR shall evaluate the quality of the recorded data to determine if the bit error rate (including those errors introduced by recorder, the acquisition unit, the source of the data on the aeroplane and by the tools used to extract the data from the recorder) is within acceptable limits and to determine the nature and distribution of the errors;

c)a complete flight from the FDR shall be examined in engineering units to evaluate the validity of all recorded parameters. Particular attention shall be given to parameters from sensors dedicated to the FDR. Parameters taken from the aircraft’s electrical bus system need not be checked if their serviceability can be detected by other aircraft systems;

d)the readout facility shall have the necessary software to accurately convert the recorded values to engineering units and to determine the status of discrete signals;

7.3 Flight recorder systems shall be considered unserviceable if there is a significant period of poor quality data, unintelligible signals, or if one or more of the mandatory parameters is not recorded correctly.

7.4 A report of the annual inspection shall be made available on request to regulatory authorities for monitoring purposes.

Are you looking for an annual FDR readout/analysis report?

Do you want to check recorded FDR parameters health status?

FDL will help you to meet annual FDR inspection requirements at LOW COST.

EASY PROCESS:

You end downloaded FDR data or send the unit to us

we analyze the data…

you receive FDR readout report.

Email us at support@flightdatalogic.com

List of FDR Part Number Capabilities (but not limited to this list)